www.ledidea.com * speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 2005g t -1 (3 mm) panel mount led indicator G33M and g35m series the G33M and g35m series of indicators are made of chrome-plated brass. any of idea's standard t-1 lamps may be used. these assemblies are furnished with matching lock washer and nut. recommended for panels up to 3 mm (1/8?) thick. recommended hole size is 6 mm (or 15/64?). for the convenience of oem users, idea can furnish both of these series with wires attached. black plating is also available on special order to high volume users. specify part desired as follows: (x = total number of leds in array, and may be up to 8 maximum.) G33M/order code or g35m/order code f or example: ?G33M/g? designates an assembly with a green led. order code and information (all ratings at 25c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code p eak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required hi eff red i 635 2.0 10 60 10-20 green g 565 2.1 10 60 10-20 y ellow y 585 2.0 10 60 10-20 orange o 610 2.0 10 60 10-20 tinted transparent high brightness hi eff red it 635 2.0 40 40 10-20 green gt 565 2.1 40 40 10-20 y ellow yt 585 2.0 40 40 10-20 tinted diffused f or 2ma operation hi eff red i2 635 2.0 1.0 @ 2ma 60 2-10 green g2 565 2.1 1.0 @ 2ma 60 2-10 y ellow y2 585 2.0 1.0 @ 2ma 60 2-10 tinted diffused 5v operation hi eff red i5 635 - 10 60 5 v green g5 565 - 10 60 5 v y ellow y5 585 - 10 60 5 v white diffused bipolar, bicolor red/green eg 635/565 2.0/2.1 4 / 4 90 10-20 y ellow/green yg 585/565 2.0/2.1 4 / 4 90 10-20 red/yellow ey 635/585 2.0/2.0 4 / 4 90 10-20 3.0? 8.0 2.5 13 max G33M anode 3.0? 8.0 3 12 max g35m anode
|
